Industrial-Scale Spotting with Actichem Citrus Gel 5L

In commercial environments—such as cinemas, schools, and airports—chewing gum and grease are constant challenges. Actichem Citrus Gel provides the “grunt” needed to liquefy these contaminants without the structural risks associated with traditional liquid dry-cleaning solvents. By purchasing in the 5L bulk format, professionals ensure they have enough product to tackle extensive “gum-runs” while maintaining a lower overhead per job.

Why Professionals Choose the 5L Bulk Pack

• Bulk Value & Refill Economy: Designed as a cost-effective refill for your 500ml spotting bottles or for use in large-scale restoration projects.

• Controlled “Stay-Put” Tech: The gelled consistency is specifically designed to target the stain and stay exactly where it’s applied, protecting the carpet adhesive and underlay.

• Superior Solvent Power: Utilizes high-grade d-Limonene to rapidly break down non-polar stains like asphalt, motor oil, lipstick, and adhesives.

• Rinse-Free Finish: Contains built-in emulsifiers that allow the gel to be completely flushed out during the extraction process, leaving no oily residue behind.

• Enhanced Safety Profile: Non-toxic and biodegradable citrus solvents make this a preferred choice for high-occupancy buildings.

• Pleasant Natural Scent: Leaves a vibrant, fresh citrus aroma that signals a deep clean to your clients.

Professional Application Guide

1. Refilling: Use the 5L drum to refill your Actichem 500ml spotting bottles for easier application on-site.

2. Application: Apply the gel directly to the gum or grease spot.

3. Dwell Time: Allow 3–5 minutes for the solvents to liquefy the contaminant. For older, hardened gum, use a spatula to gently “nick” the surface of the gum to allow deeper gel penetration.

4. Agitation: Gently agitate with a spotting brush to break the bond with the fiber.

5. Extraction: Always perform a thorough hot water extraction rinse to remove the emulsified stain and gel.

Product Brochure & Use: 486_citrus_gel