Actichem Odourtak W – Citrus is a professional-grade, water-based odour control solution specifically engineered for fire restoration and disaster remediation. Powered by advanced Elimotech technology, it is highly effective at neutralizing stubborn smoke and soot odours caused by protein, paper, and timber fires. Formulated for cold/wet and thermal fogging applications, it penetrates deeply into microporous surfaces to erase malodours at a molecular level. Safe for restoring fresh air in rooms, offices, and living spaces, it leaves behind a clean, refreshing citrus fragrance.
Benefits
- Molecular Odour Elimination: Pairs with odour molecules on a molecular level to permanently neutralise smoke and soot odours without masking.
- Cold/Wet Fogging Optimised: Designed for use in cold/wet foggers, producing fine droplets that replicate smoke particle pathways for deep penetration.
- Advanced Chemistry: Utilises high-purity glycols and solvents to ensure extended suspension and maximum contact with odour-impacted surfaces.
- Wide Smoke Application: Effectively targets odours from timber, paper, protein, and synthetic fires.
- Fresh Citrus Scent: Leaves behind a clean, citrus fragrance to refresh treated spaces and reset olfactory senses.
- Ideal for Inhabited Spaces: Safe and effective for use in occupied areas such as homes, offices, and common rooms during or post-restoration.
Application areas and surface suitability
Odourtak W (water) is formulated to be applied through cold/wet fogging equipment primarily for treating strong, stubborn odours caused by smoke and soot. This process can be used for initial knock-down on job entry and once fire remediation wash-down has been completed.
The heated thermal fogging process creates micro-droplets to mimic the passage of micro-smoke particles as they have deposited in the tiny pores of affected surfaces, providing extremely effective results.
Odourtak W – Ideal for inhabited spaces such as rooms, offices, halls etc.
How to use
Always pre-test in an inconspicuous location for substrate sensitivity to chemicals. Observe all safety directions and read the SDS before use.
Suitable protective clothing must be worn.
A respiratory protection device must be worn as described below:
- Gas filter – Filter type Type A Class 1 or 2 protecting against organic and inorganic vapours (solvents with boiling points above 65°C).
Must meet AS/NZS standard(AS1715/1716). Cartridge Colour is Brown.
- Combine filter – filter type CF22 A2 protecting against organic and inorganic gases, solid & liquid particles and micro-organisms.
Dilutions
Odourtak is supplied ready-to-use. Do not dilute or mix with other chemicals.
Use 0.5ml – 1.5ml per m3 air/room space.
When using Odourtak W ensure the fogging equipment is compatible with water based products.
Application
OPTIONAL – cold/wet fog as an initial knock-down solution on entry of the job.
Remediate the area using professional restoration techniques.
Prepare for fogging by:
- Determining the volume of the room to establish how much Odourtak will be required to treat the area.
- Covering or removing all food, food equipment and all items which may be negatively affected by water-based solvents (Odourtak W)
- Apply Odourtak using cold/wet fogging equipment at a rate of 0.5ml – 1.5ml per m3 air/room space.
- Keep the treated area closed for a minimum of 30 minutes. Ventilate for 1 hour before allowing re-occupation.
