Fibretech Citrus Pro Spotter/Booster 500 ml

SKU: PCC-CP500

Account required to see pricing:

FibreTech Citrus Pro is a dual purpose product with a d-Limonene base making it a powerful, yet safer alternative to most solvents.
It can be used as a straight solvent for spot and stain removal or as a solvent booster for most pre-sprays.

As a Pre-spray Booster: Citrus Pro is most often used to boost the solvency of cleaning detergents. It’s ability to be combined with surfactants and be easily rinsed away make it a perfect booster for most presprays and detergents used in carpet, upholstery and hard surface cleaning. Its powerful action aids in stripping away oily type soils in commercial, factory and restaurant situations where oily soils are prevalent. Also works on oil build up in traffic areas on upholstery.

  • Gives your pre-spray or emulsifier more power to remove oily and greasy soil on tough cleaning jobs.
  • For carpet, upholstery, ceramic tile and grout.

WHERE TO USE: Recommended where oily soils are prevalent or an issue such as restraints and factory complexes. Perfect for oleophilic fibres like polypropylene and polyester where oil can become hard to remove. NB: Aged and oxidised oils can become permanent in these fibres and often this is evident by a yellowing effect from the oils.

HOW TO USE:

  • PUMP-UP SRAYER: Add 10 to 20 mls of Citrus Pro per 1 litre of premixed cleaning solution.
  • INLINE SPRAYER: (Hydroforce) Add 400 to 800 mls of Citrus Pro to 5 litres of premixed cleaning solution in an 8:1 ratio sprayer (yellow tip). In a Hydroforce Revolution where neat solution is in the bottle add 400 to 800 mls per litre of solution.

As a spotting solvent…

WHERE TO USE: Citrus Pro is ideal to use on all carpet fibres, fabrics and hard surfaces. However some surfaces are solvent sensitive including various carpet backings, some plastics and polymer coatings.
HOW TO USE: Always pre-test in an inconspicuous location for substrate sensitivity to solvents and dye stability. Do not use on solvent sensitive surfaces including bitumen backed carpeting.

1. Sponge or scrape up any surface spot material.
2. Apply Citrus Pro to a clean white absorbent cloth and apply to spot.
3. Citrus Pro can also be applied to severe stains and hard surfaces using a trigger spray bottle.
4. Blot or tamp to remove spot. Do not rub. Deep spots may need light brushing. Work from outside to centre of large spots.

Related products that you might need…
No results found.