Maximising Remediation Success with Neutrasol Prep Wash 5L

Neutrasol Prep Wash represents the “Stage 1” protocol for successful methamphetamine remediation. In contaminated environments, meth residues are often trapped beneath a layer of airborne oils, skin fats, and cooking grease. If this layer isn’t removed first, even the most powerful neutralizers may fail to reach the target contaminants. This 5-litre concentrated format allows for easy transport and precise dilution for targeted remediation tasks.

Once this first stage is complete the foam wash using Neutrasol Part A & B can be undertaken.

Why Professionals Use Neutrasol Prep Wash

Using a standard household cleaner can lead to “smearing” or pushing contaminants deeper into porous surfaces. Neutrasol Prep Wash is technically balanced for the forensic cleaning industry.

• Aggressive Bio-Film Removal: Rapidly dissolves the oily residues that are characteristic of “P-user” properties and clandestine lab environments.

• Surface Tension Reduction: Lowers the surface tension of the substrate, allowing for deeper penetration of the subsequent Neutrasol Foam treatment.

• High-Alkaline Power: Provides the industrial “grunt” required to lift stubborn soot, nicotine, and atmospheric grime from walls and ceilings.

• Economic 5L Concentrate: A highly efficient formula that can be diluted for various levels of soiling, ensuring low cost-per-job for focused decontamination areas.

• Residue-Free Rinse: Designed to rinse away cleanly, leaving no soap film that could interfere with the chemical reaction of the Neutrasol molecular neutralizers.

Application Guide for Forensic Restoration

1. Assessment: Identify high-load areas (kitchens, bathrooms, and “smoking” zones) where oily buildup is most prevalent.

2. Dilution: Dilute Neutrasol Prep Wash according to the soil load (refer to the CSL technical course manual for specific remediation ratios).

3. Application: Apply via a low-pressure sprayer or sponge, working from the bottom up to prevent streaking.

4. Agitation: Agitate the surface with a soft-bristle brush or microfiber pad to lift the primary grime layer.

5. Extraction/Rinse: Thoroughly rinse the surface with clean water or extract to remove the emulsified soil before applying the Neutrasol A&B Foam system.