OdorX Tabac Attack 1 gal

SKU: US-TAG

Account required to see pricing:

ODORx Tabac Attack specifically neutralises and destroys tobacco and cannabis smoke.

Tabac Attack works at the molecular level to neutralise and permanently deodorize materials affected by these odours. It can be used on hard or soft surfaces, as an air freshener, or added to other cleaning solutions to boost odour control.

Tabac Attack consists of water-soluble solvents and odour control essential oils. The solvents act as evaporative control agents and the essential oils instantly counteract tobacco-related smoke odors.
For best results, use Tabac Attack in conjunction with a thermal fogging procedure. TabacAttack is sold as a concentrate and is diluted with water during application. TabacAttack can be applied as a stand alone deodorizer and can also act as an additive in various cleaning solutions.

DIRECTIONS:

Prepare all Ready-To-Use (RTU) solutions BEFORE entering the worksite. Dilute with water to desired concentration and spray lightly onto absorbent materials (see cautions below). Apply directly to surfaces coated with tobacco residues. Repeat as needed. For airborne odors mist twice in the upper corners of the room, repeat or expand treatment as needed.

TabacAttack is diluted with water when used in the following applications:
• GENERAL PURPOSE AIR FRESHENER: Dilute 2 ounces of concentrate with enough water to make 1 gallon of RTU (16 mL / L). Spray upwards in a fine mist. Apply routinely for total odor control.
• FURNACE/AIR CONDITIONERS: Add 4 ounces of concentrate to a five gallon pail of warm water (6 mL / L). Wash interior and spray onto filters and into vents periodically for effective odor control. To control stronger odors, increase this to as much as 6 ounces per pail (9 ml / L)
• AUTOMOTIVE AND RV USES: Dilute 2 ounces of concentrate with enough water to make 1 gallon of RTU (16 mL / L). Spray lightly on to absorbent surfaces, spray into heater/air conditioner exhaust ports periodically for effective odor control. Note a convenient approach is to add ½ ounce of concentrate to a quart spray dispenser bottle, fill to the mark with water and attach a trigger sprayer. TabacAttack is used as a cleaning additive in these situations:
• FIBER CLEANING: Add 1 ounce of concentrate per gallon of extraction or shampoo solution (8 mL / L). Reapply after cleaning for additional freshening effect. To control stronger odors, double the concentration.
• MOPPING OR WATER BASED CLEANING SOLUTIONS: Add 1 ounce of concentrate per gallon (8 mL / L) to water based mopping solution. To control stronger odors, double the concentration.
• LAUNDRY: Add 1 ounce per 8 pound (8 mL per 3.6 kg) load to remove odors and freshen. For stronger odors, double the concentration.
• TRUCK MOUNTED CLEANING EQUIPMENT: Add 4 ounces of concentrate for each gallon of solution in the detergent holding tank. (32 mL /L)

Color: Colorless to off white
Odor: Pleasant fragrance
Appearance: Transparent liquid
Flash point: 147° F.
Specific gravity: 1.0

Related products that you might need…
No results found.