Kemsol Virulabs Viruclear 20L – Hard Surface Sanitiser

SKU: KS-VC20

Account required to see pricing:

Kemsol Virulabs Viruclear 20L — Broad-Spectrum Hard Surface Sanitiser

Viruclear 20L from Virulabs is a concentrated, broad-spectrum surface sanitiser engineered for environments where fast, reliable pathogen control is critical. Built around Stabilised Hydrogen Peroxide (SHP) combined with specialist surfactants, Viruclear works as an oxidant — producing hydroxyl free radicals (OH) that attack the essential components of microorganisms, including lipids, proteins, and DNA/RNA. The result is a highly effective sanitiser that disrupts pathogens at a cellular level rather than simply masking them.


Developed for Coronavirus & Persistent Pathogens

Viruclear has been specifically developed to reduce the infectivity of coronaviruses, which are known to persist on common surfaces such as metal, glass and plastic for up to nine days. This makes it a practical choice for high-traffic commercial spaces, healthcare facilities, and any environment where surface contamination is an ongoing risk.


Biosecurity & Bird Flu (H5N1) Protection

Viruclear also ranks among CSL’s top-tier sanitisers and disinfectants for helping minimise the transfer and spread of H5N1 Avian Influenza (Bird Flu) in New Zealand. It’s well suited to agricultural, commercial and other high-risk environments where strict hygiene and biosecurity protocols are essential to protect livestock, staff, and premises.


How It Works

The efficacy of any bactericide or virucide depends on sanitiser concentration and contact time. Laboratory results have shown 0.5% hydrogen peroxide to be effective against coronaviruses in as little as 60 seconds — and the longer the contact time, the greater the efficacy. Viruclear is formulated to leave minimal residue, so in most cases it doesn’t need to be rinsed off. Where time allows, wiping the surface with a damp cloth helps remove biofilm — a protective layer bacteria and viruses build up on surfaces. Viruclear’s oxidising action breaks down this biofilm, and wiping helps lift it away. Once the sanitising process is complete, Viruclear breaks down naturally into hydrogen and oxygen, leaving no harmful chemical residue behind.


Application Methods

Viruclear 20L is versatile across three main application methods:

  • Spray & Wipe – Dilute 1:15 with cold water (or use a 30ml plunger to dispense 60ml of product from a 5L container for a 1L bottle). Spray onto the surface and allow 60 seconds of contact time, then wipe with a clean cloth and allow to air dry. Gloves are highly recommended.
  • Pour Application – Dilute 1:15 with cold water and pour onto hard surfaces. Spread evenly with a clean cloth, allow 60 seconds of contact time, then remove excess with a damp cloth. Gloves are highly recommended.
  • Bulk Spray for Large Surface Areas – Dilute 1:15 with cold water and load into a backpack or pump-up sprayer. Apply thoroughly to surfaces and allow to air dry. Gloves and a face mask are recommended, and the sprayer should be thoroughly rinsed after use.

For surfaces with heavy soiling, a pre-clean is recommended before sanitising. In situations involving known viral or bacterial contamination, a stronger 1:10 dilution should be used.


Ideal Applications

  • Commercial and industrial facilities
  • Healthcare and public facilities
  • Agricultural and biosecurity settings
  • Hard, non-porous surfaces (metal, glass, plastic)

Product Specification Table

Specification Detail
Product Name Kemsol Virulabs Viruclear
Pack Size 20 Litre (& 5 Litre)
SKU KS-VC20
Active Ingredient Stabilised Hydrogen Peroxide (SHP) + surfactants
Type Broad-spectrum hard surface sanitiser
Contact Time 60 seconds (standard use)
Standard Dilution 1:15 with cold water
High-Risk Dilution 1:10 (known viral/bacterial contamination)
Application Methods Spray & wipe, pour, bulk spray (backpack/pump sprayer)
Suitable Surfaces Metal, glass, plastic, hard non-porous surfaces
Suitable Environments Commercial, industrial, healthcare, public facilities, agricultural/biosecurity
Residue Minimal — no rinse required in most cases
Breaks Down To Hydrogen and oxygen

Viruclear 20L is available through Cleaning Systems Ltd (SKU: KS-VC20). Trade account required for pricing — register here or contact our team for bulk ordering options. Full technical and safety information is available in the Safety Data Sheet.

Viruclear 20L is a concentrated, broad-spectrum hard surface sanitiser powered by Stabilised Hydrogen Peroxide (SHP). Formulated to reduce the infectivity of coronaviruses and other pathogens on metal, glass and plastic, it’s ideal for commercial, industrial and healthcare facilities. Fast-acting with a 60-second contact time, low residue, and breaks down to hydrogen and oxygen after use.

Directions for use:

The efficacy of any bactericide/virucide is a function of the concentration of the sanitiser and the contact time. Whilst laboratory results have shown 0.5% hydrogen peroxide to be effective on coronaviruses in as little as 60 seconds, the longer the contact time the greater the efficacy. Viruclear has been designed to leave minimal residue so in most instances it can be left on the surface and not rinsed. However, if time allows the surface can be wiped with a damp cloth. This will help remove any biofilm present. Biofilms build up on most surfaces and help protect bacteria and viruses. The oxidising nature of Viruclear helps breakdown the biofilm and wiping the surface helps remove it. Once the oxidisation/sanitising process has taken place and killed bacteria and viruses, Viruclear will breakdown to hydrogen and oxygen.

APPLICATION:

  • Spray n Wipe Application – The use of gloves is highly recommended. Dilute Viruclear 1:15 (or use a 30ml plunger to dispense 60ml of product from 5L container for a 1L bottle) with cold water. Spray onto surface and allow 60 seconds of contact time for full sanitising action to take place. Wipe surface with clean cloth to remove any moisture and allow to air dry.
  • Pour Application – The use of gloves is highly recommended. Dilute Viruclear 1:15 (or use a 30ml plunger to dispense 60ml of product from 5L container for a 1L bottle) with cold water and pour onto hard surfaces. With a clean cloth move the solution across the entire surface to be sanitised. Allow 60 seconds of contact time before removing excess situation with a damp cloth.
  • Bulk Spray Large Surface Areas – The use of gloves and face mask is highly recommended. Dilute Viruclear 1:15 (or use a 30ml plunger to dispense 60ml of product from 5L container for a 1L bottle) with cold water and pour into a backpack or pump up sprayer. Spray surfaces to be sanitised thoroughly with Viruclear solution and allow to air dry. Thoroughly rinse sprayer after use.

Please Note: Surfaces that show large amounts of gross soiling will need an initial pre-clean before a final sanitising step.

In situations where there is a known viral or bacterial contamination a 1:10 dilution should be used.E25

Related products that you might need…